CEI X-Carrier 참조 매뉴얼 - 페이지 11

{카테고리_이름} CEI X-Carrier에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CEI X-Carrier 11 페이지.

REFERENCE GUIDE | Frequently Asked Questions

Frequently Asked Questions | Continued

I want to plug one 4x PCIE-2.0 board into the PCIE socket, but there is one RJ45 nearby. Is this an issue?

There shouldn't be any issues connecting to the PCIe slot, even with the RJ45 connection nearby.

How do you connect to the J19 Debug Header? Do you use a daughter board?

We have never used J19. The pinout is readily available online, so we suggest finding a compatible cable or building one.

Which port of the carrier is disposed as video input and which one could be used as output? If I use the carrier board HDMI port, can I

record a 4K 30fps video stream?

The only video input is the CSI port. We suggest this board for HMDI etc:

https://blog.zhaw.ch/high-performance/2016/05/20/4k-hdmi-to-csi-interface-for-tx1-evalboard/

How many GPIOs dedicated to managing drivers are there? Can I extend the USB 3.0 port to two or three more USB ports?

Any USB extender will allow for more USB ports. For detailed information, please review our reference guide:

http://coloradoengineering.com/wp-content/uploads/2016/10/Reference-Guide_TX_Final.pdf

Is there a difference of the processor part compared to the architecture of the TX1? For example, if we have an algorithm running on

the TX1, is it possible to transfer this code easily to your platform?

Our Jetson TX1 and X-Carrier run off the same processor as the Jetson Kit - straight from NVIDIA. You should be able to port your code

over without any issues.

X-Carrier Board | Rev B

PAGE 10