GREAT PLAINS 605NT 유지 관리 매뉴얼 - 페이지 7

{카테고리_이름} GREAT PLAINS 605NT에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GREAT PLAINS 605NT 7 페이지. Six foot no-till

2) LEVELING THE DRILL: Lower the drill as it is being driven forward.

A) On the 3P605NT level the drill box top with the tractors top 3-point link.

B) On the 605NT level the drill frame front to back with the turnbuckle on.

3) SPRING TENSION ON THE OPENERS: The "W" clips on the opener spring rods

should be in the lowest hole. This is the correct location in all conditions. The "W" clips

can be raised one hole in the wheel tracks only if penetration is not adequate.

4) SEED DEPTH: All of the opener "T" handles

should be set the same (about mid-range)

when starting. Check seed depth by digging

down to the seed, and adjust to desired depth

by moving the "T" handle. The openers in the

wheel tracks may need to be one hole deeper

because of soil compaction.

Press Wheel Depth Adjustment