Dynabrade 66402 사용 설명서 - 페이지 6

{카테고리_이름} Dynabrade 66402에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynabrade 66402 6 페이지. Tool post grinder-machine

페이지 인쇄
66417
Contact Wheel Shaft
Contact Wheel Change:
1. Turn air control valves to closed position. Disconnect power source from tool.
2. Remove belt from tool.
3. Remove 97112 Set Screw from front housing and remove entire contact wheel assembly.
4. Remove 97435 Retaining Ring.
5. Press 66417 Contact Wheel Shaft from contact wheel and bearing.
6. Press new contact wheel, with bearing installed, onto contact wheel shaft.
7. Line up recess hole in contact wheel shaft with set screw hole in front housing. Replace and tighten set screw with shoulder of contact wheel shaft
pressed firmly against machine face of front housing.
95800 Hose Cuff
1-1/4" x 1-1/4" (32mm x 32mm) Dia.
Has internal thread for
1-1/4" (32mm) dia. hose.
One cuff (not installed). Mounts directly to machine.
54205 Exhaust Hose
By-the-foot (no cuffs); specify up to 50 feet (15 meters).
Precision Tool Post Grinder Contact Wheels
Part No.
Diameter
Width
66429
4"
1-1/2"
66430
4"
1-1/2"
66431
4"
1-1/2"
66432
4"
1-1/2"
66433
4"
1-1/2"
Visit our Web Site: www.dynabrade.com
DYNABRADE, INC., 8989 Sheridan Drive • Clarence, NY 14031-1490 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
© DYNABRADE, INC., 2014
Contact Wheel Assembly
Contact Wheel Assembly Parts
Contact Wheel
Accessories
Mounts to machine's
vacuum scoop.
1-1/4" (32mm) Diameter
Face Material
50 Duro Plain Neoprene
70 Duro Plain Neoprene
90 Duro Plain Neoprene
70 Duro Serrated Neoprene
90 Duro Serrated Neoprene
Zone Artisanale • L-5485 Wormeldange—Haut, Luxembourg • Telephone: 352 76 84 94 1 • Fax: 352 76 84 95 1
(sold separately)
97516
Double Row Contact
Wheel Bearing
66438 Coolant
Nozzle Assembly
For wet operations
.
Controls
flow and splash
point of coolant.
96259 Motor Tune-Up Kit:
Includes assorted parts to help
maintain and repair motor.
97435
Contact Wheel
Retaining Ring
66439 Key Mount
66439
Mount
Allows offset tool
installation for "facing"
passes.
®
DYNABRADE
PRINTED IN USA