Ceia PD240CH 사용 설명서 - 페이지 10
{카테고리_이름} Ceia PD240CH에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ceia PD240CH 20 페이지.
페이지 인쇄
8
Use
When a metal mass is detected, the alarm indicator provides a RED signal proportional to
the size (small/medium/large) or the distance of the object.
i
A dual-tone audio indication is also provided. The center of the target corresponds to the
tonal change.
The optical
alarm signal is
always enabled,
except for
specific
customer's
request.
2.5.1
Two-step localization procedure (Pin-Pointing)
When the device detects a target, the change of the alarm tone indicates the centerline of
an area where it is probably located.
To obtain a more precise localization, sweep with crossed axis in order to determine the
center point of the target.
2.5.2
Alarm Reset
The detector can trigger an alarm when placed near to a large size metal mass.
In this case, move away the detector from the metal mass: the alarm will reset
automatically. A prolonged alarm can be quickly reset, by pressing the ON/OFF button
briefly.
Do not reset the detector when placed near to a large size metal mass!
TONE A
TONE B
FI100K0025v1100 UK - - PD240CH
No metal mass
Small metal mass
Medium metal mass
Large metal mass