Dynabrade 40321 분해 및 조립 지침
{카테고리_이름} Dynabrade 40321에 대한 분해 및 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynabrade 40321 18 페이지.
페이지 인쇄
Disassembly Instructions - 0.5 hp. Dynafile II
Models: 40320, 40321, 40324, 40326, 40330, 40335
Important: Use these instructions along with the tool parts page or manual.
Notice: Shut off the air supply and depress throttle lever to deplete remaining air.
• Carefully disconnect the tool from the air supply hose. • Remove the abrasive belt and contact
arm assembly. • Use the Special Repair Tools designed for the disassembly and assembly of
this motor.
Motor Disassembly:
1. Use a 9/64" hex key to loosen the 95311 Screw. Remove the motor from the belt housing.
Use a 9/64" hex key to
loosen the 95311 Screw.