GREAT PLAINS BD7600-30 현장 조정 매뉴얼 - 페이지 4

{카테고리_이름} GREAT PLAINS BD7600-30에 대한 현장 조정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GREAT PLAINS BD7600-30 12 페이지. Box drill

How To Set Ground Drive High & Low Range

Sprockets:

Note: Set each sprocket range according to the seed

rate manual.

1) Push down on the idler handle.

2) Remove the chain.

3) Route the chain, on the correct range, around the

idlers and sprockets as shown to the right.

4) Set each drill box with the same range.

How To Set Hydraulic Drive High & Low Range

Sprockets:

Note: Set each sprocket range according to the seed

rate manual.

1) Push down on the idler handle.

2) Remove the chain.

3) Route the chain, on the correct range, around the

idlers and sprockets as shown to the right.

4) Set each drill box with the same range.

How To Lock Up & Unlock Openers:

Note: Openers must be locked up for transport or for

working under the drill. Opener handles can be moved

with openers up or down, but lock indicators only

engage and disengage after the openers are raised

completely. There are two lock handles on each drill

section, six handles total.

To Lock Up Openers:

1) Position the lock handles (1) in ROAD position (2).

2) Completely raise the openers until the spring

loaded locks, latch into place.

Document

#DRUS400C-0012A

49633

4 of 12