Active-semi ACT2861EVK1-201 사용자 설명서 - 페이지 6

{카테고리_이름} Active-semi ACT2861EVK1-201에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Active-semi ACT2861EVK1-201 20 페이지.

UG110

Rev 2.0, 23-Jul-2018

In addition, short current, pre-charge current, termination detection current can also be modified by the ACT2816

GUI.

OTG Input Current Limit Configuration -

The ACT2861EVK1-201 EVK OTG current limit is set to 6.06A.

This is a function of the 10mΩ current sense resister, R21, the 20kΩ ROLIM resistor, R14, and the I

C OTG

Battery Ilim bits, OTG_BAT_ILIM, which are set to 200% by default. The OTG input current limit is easily

changed by modifying any of these three parameters. The easiest way to change the input current limit is with

the OTG Battery Ilim field in the GUI.

OTG Output Current Limit Configuration -

The ACT2861EVK1-201 EVK OTG output current limit is set

to 3.03A. This is a function of the 10mΩ current sense resister, R6, the 20kΩ RILIM resistor, R15, and the I

OTG Current Limit bits, OTC_CC, which are set to 100% by default. The OTG output current limit is easily

changed by modifying any of these three parameters. The easiest way to change the input current limit is with

the OTG Current Limit field in the GUI.

Innovative Power

ActiveSwitcher

is a trademark of Active-Semi.