Active-semi HYDRA-X10 사용자 설명서 - 페이지 3

{카테고리_이름} Active-semi HYDRA-X10에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Active-semi HYDRA-X10 16 페이지. Power application controllers

VERVIEW

Active-Semi's HYDRA-X10 development platform is a complete hardware solution enabling users not only to

evaluate the PAC5210 device, but also develop power applications revolving around this powerful and

versatile Cortex M0 based microcontroller. The module contains a PAC5210 power application microcontroller

and all the necessary circuitry to properly energize the MCU and its internal peripherals once power is

applied.

To aid in the application development The HYDRA-X10 offers access to each and every one of the PAC5210

device's signals by means of a series of female header connectors. Whereas the HYDRA-X10 module is

referred to as the HYDRA-X Body, subsequent daughter card modules can be interfaced through these

female connectors by merging both boards together. Throughout the rest of this documentation, said

attachable daughter cards will be referred to as Heads.

The HYDRA-X10 Body also contains all the necessary circuitry to connect the module to a PC computer

through a conventional USB port which can then be used in the communication efforts by taking advantage of

the PAC5210's UART interface. Graphical User Interface (GUI) software suites can then be used to externally

control particular application's features.

The final block within the HYDRA-X10 Body is a complete Serial Wire Debug (SWD) module which allows the

microcontroller to be both programmed and debugged in real time. This SWD debugger block follows the

CoLinkEx architecture and is compatible with the CooCox Integrated Development Environment (IDE).

Both the USB to UART and SWD debugger can be disconnected from the PAC5210 device in case the user

wishes to utilize a different means of serial communications or SWD debugging.

Active-Semi's HYDRA-X10 Body kit consists of the following:

HYDRA-X10 Body module

•

HYDRA-X10 User's Guide

•

Schematics, BOM and Layout Drawings

•

Rev 1.0 June 2014