Gaggenau RW 464 사용 설명서 지침 - 페이지 9
{카테고리_이름} Gaggenau RW 464에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggenau RW 464 18 페이지.
페이지 인쇄Switching the appliance on
Switch on the appliance with the On/Off button ÿ.
The appliance begins to cool. Light is switched on
when the door is open.
Operating tip
After the appliance has been switched on, it may take
several hours until the set temperature has been
reached.
Set the language
The display languages can be changed according
to the table in the chapter "Special functions", "Setup
mode".
In order to change the display language:
Press setup button μ.
1.
Press the ¾ or ¿ setting button, until the set
2.
language is displayed.
Press the @ or A setting button, until the desired
3.
language is displayed.
Press the setup button μ, in order to store
4.
the settings. The set temperature is displayed
again in the fascia.
Setting the temperature unit
The temperature can be displayed in degrees Celsius
(°C) or degrees Fahrenheit (°F).
Press setup button μ.
1.
The first menu (temperature unit) is displayed.
Press the @ or A setting button in order to switch
2.
between degrees Fahrenheit (°F) and degrees
Celsius (°C).
Press the setup button μ, in order to store
3.
the settings.
The set temperature is displayed again in
the fascia.
Setting the temperature
The temperatures in both climatic zones can be set
independently of each other from +5 °C to +20 °C.
We recommend a setting of +11 °C.
1.
Activate the setup mode with the selection
button ¿.
2.
Select the required climatic zone.
Set the desired temperature with the @ (warmer)
3.
or A (cooler) setting buttons.
Setting up the brightness of the
display
You can specify how bright the display should appear
when the door is closed.
1.
Open the door.
2.
Press the light switch 1 and keep it pressed.
3.
Use the +/– buttons to adjust the brightness.
4.
Release the light switch 1.
5.
Close the door.
The display will have the specified brightness.
9