7Dayshop DS-045 사용자 설명서 - 페이지 2

{카테고리_이름} 7Dayshop DS-045에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 7Dayshop DS-045 2 페이지. 7dayshop - t6 cree led torch

Charging:



Turn off the torch and remove the batteries.



Insert the 2 x 18650 2200mAh Li-Ion batteries in to the charger making sure to match the (+)

positive terminal on the charger with the (+) positive on the battery.



Connect the charger to the mains socket and switch it on.



The RED LED should illuminate on the charger to indicate the charging cycle has begun.



The GREEN LED should illuminate once the batteries are full (1-3 hours).

Basic operation:



Insert the 2 x 18650 batteries by unscrewing the switch cap at the rear of the flashlight. The

batteries go in to the body (+) positive first.



The ON/OFF button is located at the rear of the torch,



When the ON/OFF button is fully depressed, the torch will cycle through the modes in the

following order: (High, Off, Medium, Off, Low, Off, Flashing, Off, SOS).



To quickly cycle through modes when the torch is in operation you can half depress the

button which will skip between modes without the off cycle.