AFFIX MADW 420-AGR 조립 설명서 - 페이지 16

{카테고리_이름} AFFIX MADW 420-AGR에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AFFIX MADW 420-AGR 20 페이지. Aluminium double width mobile towers

AFFIX MADW 420-AGR 조립 설명서
STABILIZERS
Stabilizers are to be used, when specified, to guarantee
the structural stability of the tower.
Fig. 01
Fig. 01
Fig. 01
Fig. 01
Lightly tighten the upper clamp of the stabilizer on each corner vertical posts at a height where
the foot is touching the ground. Position the clamp of the lower arm such that the lower arm
is as horizontal as possible.
Fig. 02
Fig. 02
Position the stabilizers so that the footpads are approximately equidistant from each other.
Adjust the stabilizers and reposition the clamps as required to make firm contact with the
ground. When in correct position, tighten all the clamps firmly.
Fig. 03
Fig. 03
To position a tower against a wall, do not remove the stabilizer, move parallel to the wall.
Fig. 04
Fig. 04
To position a tower in the corner of walls, remove the corner stabilizer and place the two towards
the wall, parallel to the wall. The middle one should be placed as shown in the graphic Fig.04
Fig. 02
Fig. 02
Fig. 04
Fig. 04
15
Fig. 03
Fig. 03