Active-semi PAC5222EVK1 사용자 설명서 - 페이지 7
{카테고리_이름} Active-semi PAC5222EVK1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Active-semi PAC5222EVK1 10 페이지. Power application controllers
페이지 인쇄SWD Debugging
Connector J1 offers access to the PAC5222 SWD port lines.
J1 Pin
Terminal
1
+
2
SD
3
CL
4
-
Serial Communications
Connector J7 offers access to the PAC5222 UART port lines.
J7 Pin
Terminal
1
+
2
TX
3
RX
4
-
Hall Sensor / DAC Interface
Terminal Block J10 offers access to the PAC5222 resources on PORTD utilized for hall sensor based
commutation. These resources can be alternatively utilized as PWM DAC outputs for in real time debugging.
Jumpers JMP1/2/3 are used to select the preferred function.
NOTE: 2 pin shunts must be placed on the JMP1/2/3 in order for the respective PORTC resources to be
made available.
Jumper JMP1/2/31
Description
1:2
Hall Sensor Functionality
2:3
DAC Functionality
Description
VCCIO (default is 5V)
SWD Serial Data
SWD Serial Clock
GND (System Ground)
Description
VCCIO (default is 5V)
MCU Transmit Line (PE3)
MCU Receive Line (PE2)
GND (System Ground)
Figure 3 DAC / Hall Sensor Jumper Selection
-
7
-
Rev 1.0 August 2018