GREAT PLAINS Turbo-Max 4800TM 조정 매뉴얼 - 페이지 4

{카테고리_이름} GREAT PLAINS Turbo-Max 4800TM에 대한 조정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GREAT PLAINS Turbo-Max 4800TM 7 페이지.

Gang Angle Adjustment:

Several conditions will dictate the gang angle setting

that will accomplish the desired result:

Example Of Suggested Settings:

1) Fall Operation: Cover residue and aggressively fill

in tracks.

Setting:

4-6 Degree Gang Angle

4-5" Working Depth

6-8 mph

2) Final Pass: Creating a level surface/planter-ready

seedbed.

Setting:

0 Degree Gang Angle

2" Working Depth

7-10 mph

Wing Fold Assist Proximity Sensors Adjustment

(If Installed):

Note: Wings must be folded up and the wing safety

lock pins installed when adjusting the proximity sen-

sors to prevent damage to the sensor and bracket.

1) Loosen the nuts (7) (one on the front and one on

the back side of the sensor bracket, adjust the proxim-

ity sensor to 1/8" to 1/4" from the front of the proximity

sensor to the rear of the wing tube).

2) Once adjusted, re-tighten the nuts (7) to secure the

proximity sensor in position.

Document

#TLUS600C-0001B

49371

49366

4 of 7

1/4" to 1/8"