Aircraft AIRBOY 186 OF E 사용 설명서 - 페이지 6

{카테고리_이름} Aircraft AIRBOY 186 OF E에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aircraft AIRBOY 186 OF E 18 페이지. Mobile compressor

페이지 인쇄

Safety

CAUTION! RISK OF INJURY

- Never direct compressed air to persons or animals.

- Grab the end of the compressed air hose with your

hand before opening the quick coupling in order to

prevent the tool from flying off by pressure.

- Allow the compressor to cool down prior to main-

tenance work.

2.6 Verification of operational safety

The pressure tank of the compressor is submitted to inspec-

tion. The manufacturer submitted the pressure tank to an in-

spection according to the EC Directive 2014/29 EG in conjunc-

tion with the EC type examination according to article 10 as

well as according to EN286-1. A copy of this type examination

certification and/or declaration of conformity is included in the

scope of delivery of every compressor.

The operating company must have re-inspected the individual

components to be inspected by an expert or by a „qualified

person" in the perscribed intervals. The operating regulations

for this may differ in the individual EC countries.

Regulations for compressed air tanks in Germany

Inspection periods

The given inspeciton periods are maximum values. They

should be verified by the risk assessment/valuation of em-

ployer of the operating company. No delays are admissible for

this. It is only possible to shorten the period.

The product of pressure and volume depends on the inspec-

tion periods. For this, the maximum admissible pressure (PS)

must be multiplied with the pressure tank volume (V).

Example:

Pressure tank= 50l ; max. zulässiger Druck= 10 bar

50 l x 10 bar = 500

Check

Inspection periods

Prior to commis-

PS x V </=200

sioning/ positio-

with type exami-

ning

nation certificate

PS x V </=1000

PS x V >/=200

Exterior inspec-

Once a year/

tion

every 2 years

PS x V </= 1000

Interior inspec-

Once every 5

tion

years for PS x V

</=1000

*Every 5 years

PS x V >/=1000

*The employer must communicate the relevant inspection peri-

ods to the responsible authority within 6 month after commis-

sioning the installation(par. 15 BetrSichV).

**External tests can be omitted: a) for pressure tanks accor-

ding to point 2.2 (letter a)BetrSichV, unless they are fire-hea-

ted, heated exhaust gas or electrically heated, and

b) in the case of simple pressure tanks according to BetrSichV

point 2.2 letter d. The deadline of the strength test may be ex-

tended to 15 years If it is shown in the external or internal test

that the machine can be safely operated. The confirmation

must be shown in the documentation of the risk assessment.

Table according to BetrSichV (State: 29.03.2017).

Regulations for compressed air tanks in Austria

Pressure devices as of 0,5 bar are submitted to the „Vessel

Law" pressure devices monitoring directive (DGÜW-V) in Aus-

tria.

This directive makes a differentiation between low hazard po-

tential (NGP) and high hazard potential (HGP) .

NGP: Overall compressed air product (pxV) below 3000 litres

HGP: Overall compressed air product (pxV) above 3000 litres

NGP (Low risk potential)

For the devices that fall into the NGP, the operator has no obli-

gation to inform boiler test centers. If a customer buys a device

with NGP, he / she does NOT have to register this for the first in-

spection by a boiler testing center (TÜV Austria Services

GmbH).

HGP (low hazard potential)

Inspection organisa-

tion

The operating company is not obligated to inform vessel in-

spection authorities for devices classified as NGP.

Qualified person

For devices that fall into the HGP you need a first operation test

from a boiler testing center (TÜV Austria Services GmbH).

With the declaration of conformity and the operating instructi-

ons, the tank must be reported to the boiler testing center.

Approved inspec-

tion agency

TÜV AUSTRIA SERVICES GMBH

Qualified person

Lunzerstraße 89

4030 Linz/Österreich

http://www.tuv.at

Qualified person

They carry out the service test. und stellen,if everything is ok, fill

in a book.The container is then subjected to periodic inspecti-

ons (eg test level 4, minor damage: every 2 years external ex-

amination, every 6 years an internal examination and every 12

Approced inspec-

years main examination)

tion agency

Check

Inspection periods

Strength test**

Once every 10

years

PS x V </=1000

*Once every 10

years

PS x V >/=1000

Inspection organisa-

tion

Qualified person

Approved inspec-

tion agency

AIRBOY | Version 1.07