Hi-Z Antennas CTRL421 매뉴얼 - 페이지 2

{카테고리_이름} Hi-Z Antennas CTRL421에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Z Antennas CTRL421 3 페이지. Hi-z control for remote operation of the rsw421, rsw422 or rsw2x421, rswx422

페이지 인쇄

Specifications



This unit is a rotary switch wired to operate 4 different selections



The switch position is indicated by the yellow LEDs



Unit requires 13.8VDC at 30 ma. Current



Unit is designed to operate the RSW series remote receiving antenna switches.



This unit supplies a contact closure to ground to activate the RSW series coax switches.



Power input protected with 18Volt MOV



Supplied with matching 2.1mm power plug for your convenience



Switched current should be one ampere or less



Two of these units can be used with the RSW2X421 dual 4 input switch

Simple front panel controls include a power on and off switch plus selector rotary switch.

Led lights indicate the selected direction. Personalized labels can be used for information.

One of the LEDs will always be on as an indicator when the power is switched on.

Power for the RSW series remote coax switches used with this selector switch can be

taken from the power terminals on the back panel. This will allow the remote switch power

to be controlled locally.

Hi-Z CTRL421Remote switch