GREAT PLAINS Terra Max HT1100-20 현장 조정 매뉴얼 - 페이지 6

{카테고리_이름} GREAT PLAINS Terra Max HT1100-20에 대한 현장 조정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GREAT PLAINS Terra Max HT1100-20 6 페이지. Tillage
GREAT PLAINS Terra Max HT1100-20에 대해서도 마찬가지입니다: 조립 설명서 (8 페이지)

GREAT PLAINS Terra Max HT1100-20 현장 조정 매뉴얼
Gauge Wheel Adjustment:
Note: The gauge wheels should be set in the field
position to be 1/2" to 1 1/2" off the ground.
1) Loosen the set screws on each gauge wheel.
2) Turn the jack handle to adjust the spindle receiver.
Adjusting the jack handle counterclockwise will run
the wheel closer to the ground while turning the jack
handle clockwise will cause the wheel to run further
away from the ground.
3) After adjusting the gauge wheel to the desired posi-
tion, re-tighten the set screws.
49375
6 of 6
Document
#TLUS625C-0001B