HIAT livescribe smartpen 빠른 매뉴얼 - 페이지 2

{카테고리_이름} HIAT livescribe smartpen에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIAT livescribe smartpen 4 페이지.

Step 2: Insert the Pulse 3D Recording Headset into the top of the Pulse Pen. Using the 3D recording

headset is optional, and improves the quality of the recording as it eliminates the sound of the pen

writing on the paper (scratching noises). The earphones/headsets do not need to be worn in the ears to

pick up the speaker's voice.

Step 3: Once a lesson is to begin, using the smartpen, tap on the "record" button on the Livescribe Dot

Paper. This starts the recording process.

As the lesson proceeds, use the Livescribe paper and smartpen to take notes, write key words or

numbers or draw pictures when important items are discussed. Later, when reviewing the notes,

the user can touch anywhere on the written words or pictures and the audio recording will begin

at that place in the lecture.

Step 4: Tap on "pause" to put the recording on hold. (It is preferable to use pause instead of stopping

repeatedly so that the audio recording remains in one file.)

Step 5: To end a recording, tap on the "stop" button. Turn off the pen when you are finished taking

notes.

Step 6: To replay the recording, turn the smartpen back on and tap anywhere in your notes to replay

the recording from that point. On the bottom of the Livescribe dot paper, the pen can be used to adjust

the volume, increase or decrease the playback speed, and move to different locations in the recording.

AT Quick Guide – LiveScribe Smartpen

05/09/2011