GREAT PLAINS BD7600 현장 조정 매뉴얼 - 페이지 2

{카테고리_이름} GREAT PLAINS BD7600에 대한 현장 조정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GREAT PLAINS BD7600 12 페이지. Box drill
GREAT PLAINS BD7600에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (20 페이지)

페이지 인쇄

General Information:

1) Visually inspect the drill for any signs of loose hard-

ware or hydraulic fittings.

2) Inspect and lubricate all chains with chain lube.

4) Inspect all chains daily for proper adjustment:

5) Lubricate the clutch cams daily with grease along

with spraying the hex coupler with chain lube. Remove

all buildup of grease and residue on clutches once a

year.

6) Check the tire pressure on all tires, as incorrect tire

pressure will affect seeding rate and levelness of the

drill.

Hydraulic Hookup: Refer to the table to the right for

proper hydraulic hose identification:

Hitch Height Adjustment: Adjust the drill hitch to

match the tractor draw bar height.

1) With the drill lowered to field position, extend the

jack so the lowest hitch hole is 18 inches above ground

level (A).

2) Install the drill hitch onto the tongue to match the

tractor draw bar height. The hitch can be turned over

for six different hitch heights. Always have two bolts in

two holes of both the tongue and hitch.

Document

#DRUS400C-0012A

Model

Transport 320/70R15

BD7600(HD)-26

Transport 305/70R16.5

BD7600(HD)-30

Gauge Wheel 10.0x15

Transport 380/55R16.5

BD7600(HD)-40

Gauge Wheel 340/6R16.5

Color

Red

Blue

Gray

Green

Yellow

(B) - 32.0 in (81.3 cm)

(D) - 26.0 in (66.0 cm)

(E) - 21.5 in (24.6 cm)

(F) - 18.5 in (47.0 cm)

(G) - 15.5 in (39.4 cm)

2 of 12

Tire Size

Pressure

9.5LX15-8 PLY

Hydraulic Function

Opener Lift Cylinders

Transport Lift Cylinders/Jack

Fold Cylinders

Marker Cylinders (Optional)

Hydraulic Drive

52 PSI

44 PSI

73 PSI