HiB 62030000 피팅 지침 - 페이지 3

{카테고리_이름} HiB 62030000에 대한 피팅 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. HiB 62030000 4 페이지.

What's in the Box?

•

Trim Mirror

•

Fittings pack

Tools Required

Pencil

Installation

It is recommended that this product is installed by two people.

Position the mirror in a suitable location.

2. Carefully mark the position of the mirror using a soft pencil ensuring it is level.

Remove the mirror and mark the mounting points, see Fig. 1 overleaf. Please

ensure that all marked mounting points accurately match up with the

fixing points on the mirror.

3. Using a suitable drill bit, drill holes in the marked positions to a suitable

depth. If drilling through tile, use a ceramic drill bit.

4. Insert wall plugs level with the surface of the wall. If fitting to a tiled surface,

wall plugs should be inserted below the tile surface to avoid cracking. NB.

For plasterboard walls, specialist fixings should be purchased, available

from any DIY or hardware store.

5. Screw supplied fixings into wall plugs.

6. Hang the mirror in position.

Spirit Level

Drill

Drill bit

Screwdriver

hib.co.uk