HiB Arcane Pill 50 Black 79500700 피팅 지침 매뉴얼 - 페이지 6

{카테고리_이름} HiB Arcane Pill 50 Black 79500700에 대한 피팅 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HiB Arcane Pill 50 Black 79500700 8 페이지.

Installation

It is recommended that this product is installed by two people.

Position the mirror in a suitable location according to the zonal diagram - Fig.

1, ensuring that the domestic electrical mains supply is within reach of the

cable connection point of the product.

2. Carefully mark the position of the mirror using a soft pencil ensuring it is level.

Remove the mirror and mark the mounting points, see Fig. 2. Please ensure

that all marked mounting points accurately match up with the fixing

points on the mirror.

3. Using a suitable drill bit, drill holes in the marked positions to a suitable

depth. If drilling through tile, use a suitable drill bit.

4. Insert wall plugs level with the surface of the wall. If fitting to a tiled surface,

wall plugs should be inserted below the tile surface to avoid cracking. NB.

For plasterboard walls, specialist fixings should be purchased, available

from any DIY or hardware store.

5. Screw supplied fixings into wall plugs.

6. Ensure the domestic electrical mains supply to which the mirror is being

connected is turned off. Connect the domestic mains supply to the terminal

box according to the wiring diagram, see page 3.

7. Hang the mirror in position.

8. Switch the domestic electrical mains supply for the mirror back on.