HiB Laser 빠른 매뉴얼

{카테고리_이름} HiB Laser에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HiB Laser 4 페이지. Recessed cabinets

Parity & Laser Recessed Cabinets

Art No. 44200

Please Note

This product can be fitted into a partition wall, or wall hung. Before installing

ensure you take note of measurements of recessed area or mounting points (See

fig. A).

This product must be installed with a minimum distance of 150mm between

the infra-red sensor switch and any adjacent wall or object to ensure correct

operation of the sensor.

You may need to remove the door / doors to make it easier to fit. This can be

done by unclipping the hinges. (There is a release catch at the back of the hinge).

DO NOT FIT SHELVES AT THIS STAGE.

Thank you for purchasing this HiB product.

Please read through these instructions carefully and refer back to them during installation to ensure that

your product is fitted safely and that it retains its high quality finish.

Please retain this leaflet for future reference.

Before drilling, ensure there are no hidden cables or pipes in the wall.

Parity

Laser

Art No. 44300

#02 002 R150907

Ver No.

1.0 Jan 2016