7SenseTech Hawk 4K 사용자 설명서 - 페이지 4

{카테고리_이름} 7SenseTech Hawk 4K에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 7SenseTech Hawk 4K 10 페이지.

Assembly

Step 5. Gimbal & Camera (Diagram 5)

Unscrew the camera strap from gimbal.

Attach the camera into the gimbal frame ( The camera lens

is at the front).

Fasten the camera strap with the screw.

Fit the gimbal board onto the mount under the airframe

Slide the gimbal board into the hanger and hold in place with

the screw.

Diagram 5：

Camera strap

Camera

Match the opening of the gimbal board with the hole in the gimbal

mount and drive in the screw slowly and steadily.

Notes: Do not install or remove gimbal while the aircraft is powered on to avoid permanent damage to the

gimbal.

Screw

Gimbal

Step 6. Battery ( Diagram 6)

Pull up the spring button at the airframe tail.

Align the battery with the airframe, match the battery plug with the PCB

slot and push in the battery till the end.

The battery will be locked with a click.

To remove the battery, pull up the spring button first and the pull out the

battery slowly.

Diagram 6：

Spring Button

Gesture to install or remove battery

Notes: Do not install or remove battery while it is powered on to avoid permanent damage to the battery.

Do not force the battery into the airframe if it gets stuck. Try a few more times to match the battery plug

with the PCB slot correctly.

Assembly

battery

battery plug

airframe

PCB Slot

Battery Plug