HiB Qubic 80 매뉴얼 - 페이지 3

{카테고리_이름} HiB Qubic 80에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HiB Qubic 80 4 페이지.

페이지 인쇄

11. Once fully secure, close the internal panel(s)

using the screws removed at stage 6.

12. Insert metal shelf supports in desired

position. Put glass shelf into shelf supports

and tighten the plastic grub screw whilst

holding the metal support. This will securely

clamp the shelf into position.

13. Re-attach the door(s) ensuring the hinges

fully locate and click back into position.

14. If necessary, the hinges can be adjusted in

order to reposition the door(s) (Fig.D).

15. Switch the mains supply back on.

Move door(s) up/down

Move door away/towards

the cabinet

or(s) up/down

Move door(s) left/right

or away/towards

net

or(s) left/right

Door Adjustment (Fig D)

Move door(s) up/down

Move door away/towards

the cabinet

Move door(s) left/right

Operating Instruction

This cabinet is fitted with colour temperature

changing technology.

To switch on/off

Slowly move your hand past the sensor.

To change the colour temperature

To alter the colour temperature of the

cabinet, hold your hand underneath the

sensor, the colour temperature will start to

change.

Simply move your hand away from

the sensor when the desired colour

temperature has been reached and

continue to operate the cabinet as normal -

the chosen colour temperature will remain

even after power is switched off and on

again.

Charger socket(s) are suitable for charging

and powering electric razors, trimmers and

toothbrushes.

NB. On first use of the charger socket, inserting the

plug may prove to be stiff. Reasonable force may

be required to fully insert the plug. Make sure that

the cabinet is held firmly so that it is not pushed off

the wall. After a few uses, stiffness will ease and the

socket will function as normal.

hib.co.uk