Days 108 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Days 108에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Days 108 12 페이지. Chrome plated steel wheelchair

Adjustment Procedures

Swing-away Footrest

Length Adjustment

Adjustments are made with the user sitting in the wheelchair with feet

on footplates.

1) Use a spanner to loosen the bolt at the rear of the footrest support hanger.

2) Adjust the footplate up or down as needed to provide maximum support of

thighs on the seat upholstery, then re-tighten the bolt.

WARNING!

Ensure that desired front rigging adjustment does not cause pressure to legs

at front of seat upholstery.

Swing-away Elevating Leg Rest

Raising

1) Lift up on foot plate or support assembly behind the calf pad until desired position is achieved.

2) Release the foot plate; it will automatically lock into position.

Lowering

1) Firmly grasp leg rest close to foot pate and provide vertical support.

2) Activate the leg rest lever by pushing it out

3) Slowly lower the footplate until desired position is reached.

WARNING!

Do not allow leg rest to suddenly drop.

Your footrests are capable of being rotating outwards. To achieve this pull the release lever towards

you and rotate footrest in the required direction. Lift-off from the two pivot points to remove.

Armrests (Detachable type)

Both armrests are removable. To operate, push the release lever down to unclip and lift arm out of

front socket and rear sockets.

This is a parking brake which is applied manually to the tyres when the chair is parked or stationary.

To apply the brake, push the lever forwards until the shoe is locked in place. Pull backwards to release.

Folding Back (If fitted)

This is available to reduce the overall height of the chair. Whilst at the rear of the chair, grip the small

lever and push down to release pin allowing the handle section to be folded.