Aircraft in Miniature Limited Historic Wings 조립 지침 매뉴얼 - 페이지 4
{카테고리_이름} Aircraft in Miniature Limited Historic Wings에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aircraft in Miniature Limited Historic Wings 10 페이지. 1:72 metal kit of the 1906 santos dumont 14 bis
페이지 인쇄Fret 3
Fret 4
1
ASSEMBLE THE SPOKED WHEELS
A Drill a 1/16"/1.5mm diameter hole through the centre of the female form tool as
shown in Figure 1 below. This is to let you push the discs of spokes out of the
form tool after they have been formed into a cone.
B Remove the six spoke discs from the fret and remove any burrs from the
attachment tabs.
LOWER WINGS
MAIN WHEEL
SPOKE DISCS
BASKET
DRILL HOLE IN FORM TOOL HERE
Figure 1
UPPER WINGS
ELEVATOR
CONTROL
CENTRE
(1 spare)
SPOKE DISCS
14bis STENCIL
TAIL WHEEL