Aircraft in Miniature Limited Historic Wings 조립 지침 매뉴얼 - 페이지 7

{카테고리_이름} Aircraft in Miniature Limited Historic Wings에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aircraft in Miniature Limited Historic Wings 10 페이지. 1:72 metal kit of the 1906 santos dumont 14 bis

페이지 인쇄

E Attach the aileron to the forward edge of the two interplane frames.

F Do steps 3 D and 3 E again, and assemble the left wing assembly.

4 EMPENNAGE ASSEMBLY

A Remove the elevators and rudders from the fret and remove any burrs from the

attachment tags.

B Butt join the elevators and rudders as shown in Figure 7 below and bond them.

5 AIRFRAME ASSEMBLY

A Basket assembly

(1) Remove the basket from the fret and remove any burrs from the attachment

tags.

(2) Fold the basket as shown below in Figure 8 below, then bond the edges to give

strong joints. Leave the basket until the adhesive has cured.

(3) Apply the preferred adhesive, then put the basket in position in the fuselage

and leave it until the adhesive has cured.

A R

R W

LEFT WING

ASSEMBLY

FUSELAGE

ASSEMBLY

B Put the right wing assembly in position. Engage the slots in the wing spars with

those in the wing ribs and attach the right wing assembly. Bond the joints and leave

the assembly until the adhesive has cured.

RUDDERS

BASKET

Figure 7

EMPENNAGE

ASSEMBLY

Figure 8

ELEVATORS

EMPENNAGE

PIVOT

RIGHT WING

ASSEMBLY