ADEMCO Security System VISTA-10SE 프로그래밍 매뉴얼 - 페이지 7

{카테고리_이름} ADEMCO Security System VISTA-10SE에 대한 프로그래밍 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADEMCO Security System VISTA-10SE 16 페이지.

페이지 인쇄

ADEMCO Security System VISTA-10SE 프로그래밍 매뉴얼

RF EXPANSION ZONES:

ZONE

DESCRIPTION

RF Zones

Zn = ZONE NO.

Hardwired Zone Numbers run from 01 to 06. Wireless zones run from 10 to 25.

Pre-assigned zones (if programmed): 7, 8, and 9.

With Field 22 set for RF (5800), use Zone Nos. 10-25.

ZT =ZONE TYPE

00 = Zone Not Used

01 = Entry/Exit

02 = Do not use

03 = Perimeter

04 = Interior Follower

RC = ALARM REPORT CODE

Two hex digits. For each hex digit, enter: 00–09 for 0–9; 10 for A; 11 for B; 12 for C; 13 for D; 14 for E;

15 for F.

If 00 is entered in the first pair of boxes, there will be no report for that zone.

For Contact ID

boxes. The second pair of boxes is ignored.

In = INPUT TYPE

HW = Hardwired zone (automatic for zones 1 – 6)

Enter 3 for RF: Supervised RF (default)

Enter 4 for UR: Unsupervised RF

Enter 5 for BR: Button-Type RF

L = RF INPUT LOOP

Used with 5800 RF Input Devices. Record transmitter input number.

Assign zone numbers (Zn) 10–25 to 5881L (up to 8); 5881M or 5881H (up to 16).

NOTE:

All numbers in brackets [ ] are default settings

ZONE

NO.

(Zn)

[00]

EXPLANATION OF ZONE ASSIGNMENT TABLE HEADINGS

05 = Trouble Day/Alarm Night

06 = 24-Hr Silent

07 = 24-Hr Audible

08 = 24-Hr Aux

09 = Fire

reporting, this is an enabling code only. Enter any hex digit (other than 00) in the first pair of

ZONE

ALARM RPT CODE

TYPE

(ZT)

[01] [00]

10 = Interior w/ Delay

20 = Arm–STAY*

21 = Arm–AWAY*

22 = Disarm*

23 = No Alarm Response

* 20, 21, and 22 used for 5800 RF systems only

– 7 –

INPUT

(Hex)

TYPE

(RC)

(In)

[03]

LEARNED

RF INPUT

(L)

[1]