Aircraft in Miniature Limited Historic Wings Bristol Boxkite 1910 조립 지침 매뉴얼 - 페이지 9
{카테고리_이름} Aircraft in Miniature Limited Historic Wings Bristol Boxkite 1910에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aircraft in Miniature Limited Historic Wings Bristol Boxkite 1910 10 페이지. 1:72 metal kit
페이지 인쇄(4) Attach a nickel silver pushrod to each cylinder as shown in the detail below.
E Main wheels.
(1) Cut a piece of wire for each of the two main wheel axles, or use dressmakers
pins.
(2) Attach a main wheel to one end of each axle with 5 minute epoxy adhesive,
make sure they are symmetrical and put them aside until the adhesive has
cured.
(3) Put one axle through the hole in each fuselage frame. Attach a second main
wheel to each axle with 5 minute epoxy adhesive, make sure they are
symmetrical and put them aside until the adhesive has cured.
(4) With the aircraft standing on its undercarriage, make sure the mainwheel are
equi-distant from each fuselage frame and lock the axles to the fuselage frames
with 5 minute epoxy adhesive.
Figure 10
F Rig the model with monofilament, or your preferred material, using the drawings as
a guide.
Figure 9
MAINWHEEL
AXLE
ASSEMBLY
PUSHROD - ONE
ON EACH CYLINDER