GREAT PLANES Fling DL ARF 사용 설명서 - 페이지 8

{카테고리_이름} GREAT PLANES Fling DL ARF에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GREAT PLANES Fling DL ARF 16 페이지.

Attach the Tail

❏

1. Mark the fin 1-3/4" [44mm] from the LE and centered

on the carbon supports.

❏

2. Drill a 1/8" [3mm] hole through the fin on the mark

you made.

❏

3. Bolt the wing to the fuse with the two 8-32 x 1-1/4"

[30mm] nylon bolts.

❏

4. Place the plane upside down on a flat work surface.

Align the carbon support in the fin with the carbon fuse.

Check that the fin is perpendicular to the work surface. If the

fin is not perpendicular adjust the fin slot so that it is

perpendicular. Glue the fin to the fuse with thin CA. DO NOT

remove the covering from the fin.

❏

5. Drill four 1/16" [1.6mm] holes in the locations shown in

the sketch.

❏

6. Slide the plastic elevator turnaround through the 1/8"

[3mm] hole in the rudder.

1/2" [13mm]

1/8" [3mm]