GREAT PLANES Gitabria 사용 설명서 - 페이지 8

{카테고리_이름} GREAT PLANES Gitabria에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GREAT PLANES Gitabria 20 페이지. Electrifly series

❏

6. Check that all the carbon rods and brace doublers are

in position and straight and the crutches are in position and

ﬂ at on the building table. Start by gluing the carbon rod and

the long brace doubler to the wing at the wing tip.

❏

7. Next check that everything is still straight and glue the

carbon rod to the landing gear support.

❏

8. Position the medium brace doublers so that both carbon

rods pass through the brace doubler. Glue the brace doubler

and carbon rod to the vertical fuselage.

❏

9. Once the glue has cured, glue the carbon rods to the

brace supports.

❏

10. Turn the fuselage upright and position it on the crutches.

Slide two ABS small brace doublers onto a 1 x 90mm

carbon rod. Insert the carbon rod in the slot in the top of the

stabilizer and the side of the vertical ﬁ n.

❏

11. Insert the carbon rod and brace doublers on the other

side of the ﬁ n and stabilizer.

❏

12. Check that the stabilizer and ﬁ n are perpendicular to

each other. Glue the carbon rods and brace doublers to the

stabilizer and ﬁ n.