ADEMCO TI110B1 사용자 설명서 - 페이지 7
{카테고리_이름} ADEMCO TI110B1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ADEMCO TI110B1 18 페이지. Gsm/pstn dual network burglar alarm system
페이지 인쇄6
0
0
＃
Wednesday
and the alarm panel sounds a long indicator with the screen displaying
but no year.
3. Store the common alarm receiving number
(1) Demonstration: supposing the first group of alarm receiving number is 22392458
Operation steps: press the key "
input
2
2
3
9
means the first group of alarm receiving number has been stored successfully.
(2) Demonstration: supposing the second group of alarm receiving number is 13905973618
Operation steps: press the key "
then input
1
3
a long prompt voice, which means the second group of alarm receiving number has been
stored successfully
Note: The above way is applicable for storing the third to the sixth groups of alarm
receiving numbers.
Ring
(3) The key "
" is used for dialing interrupting and pausing key of alarm telephone, and
Stop
it can be applied for segment dialing of dialing extension number. After entering the
telephone number, press the key "
the second segment dialing, and then press twice to pause 6 seconds. For example, the
telephone is 22379620
518.
4. Modify and delete telephone number
If the telephone number you stored is wrong, or you want to store a new one, you can press
the key "
" and then do as the above way. And the new one will cover automatically
Reset
the former one. If you want to delete a certain group of telephone number, you can press the
key "
" till the screen displays the telephone number you want to delete, and then you
Store
press the key "
", then the host sounds a long prompt voice, which means that you
Delete
have successfully deleted the number.
5. Set arming model
please add "0" ahead)
(1) Arm Away (Wholly Arm): when there are no stayers in all zones, you can set all the
defense zones into "Arm Away" model. Namely, all the zones can send the alarm signal
to the alarm panel and trigger alarm whistle when some intruders enter the zones.
(2) Arm Stay (Partly Arm): when there are stayers in some zones, you can set those zones
3
2
0
1
February
15th
", and the screen displays
Store
2
4
5
", and the screen displays
Store
9
0
5
9
7
", the first segment dialing is 3 seconds from
Ring
Stop
Ring
518, after dialing 22379620, pause 3 seconds and then dial
Stop
(Note: each zone should be input with two-digit number. If not,
7
5
8
3
,
0
Hour(08)
Minute 30
Month Day
Telephone
Program
1
, and then a long prompt voice, which
Telephone
Program
2
3
6
1
0
(
)
Hour Minute
, and then
and
, and then