GREAT PLANES PBY Catalin 사용 설명서 - 페이지 15

{카테고리_이름} GREAT PLANES PBY Catalin에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GREAT PLANES PBY Catalin 20 페이지. Arf

페이지 인쇄

❏

4. After installing the struts to the fuselage turn the

airplane upside-down. Align the struts on the wing making

sure that the strut rests on the wood sheeting, not the open

wing structure. Carefully drill a 1/16" [1.6mm] hole in the top

the wing but do not drill through the top of the wing!

❏

5. Insert and then remove a 2 x 10mm [3/8"] washer head

screw into each of the holes. Apply a couple of drops of thin

CA into each hole. After the glue has dried install the screws

into the strut and wing.

❏

6. Your kit comes with four plastic blisters. Two are extra

and should be saved if the time should come that you need to

gain access to the servos and removal of the original blisters

makes them unusable. Apply a bead of RC 56 canopy glue

around the entire opening of the fuselage. (We recommend

this glue because it dries completely clear, is water resistant

and after the glue has dried it is easily separated from the

item it holds in place with a hobby knife or hobby putty knife.)

Hold the blisters in place with masking tape until the glue has

dried. Clean any excess glue from the fuselage with a damp

cloth before the glue dries.

❏

7. Install the prop adapters and propellers to the motor shaft.

❏

8. Cut out and apply decals as shown on the box cover.

GET THE MODEL READY TO FLY

Install and Connect the Motor Battery

Before you can power the radio system and set up the

controls, the motor batteries will need to be charged. Charge

the batteries, and then read the following precautions on

how to connect multiple packs for ﬂ ying the model.

If you wish to use two smaller capacity 11.1V batteries, this

is how to connect them:

These two 1500mAh batteries (both 11.1V) are

being joined in PARALLEL. The result will be

one 11.1V, 3000mAh battery.

11.1V (3-Cell)

GPMP0613

11.1V (3-Cell)

GPMP0613

Connecting batteries in "Parallel" means to connect the +'s

to the +'s and the –'s to the –'s. This combines the batteries'

capacities, but the voltage remains the same.

OKAY

This is a PARALLEL battery

adapter (GPMM3142) that

connects two batteries in series.