GREAT PLANES Silhouette 사용 설명서 - 페이지 15

{카테고리_이름} GREAT PLANES Silhouette에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GREAT PLANES Silhouette 16 페이지.

Wingspan: 41 in (1040 mm)

Wing Area: 343 in² (22.1 dm²)

Weight: 27.5 – 31 oz (780-880 g)

Wing Loading: 11.5 – 13 oz/ft² (35-40 g/dm²)

Length: 38 in (965 mm)

Requires: 4-5 channel radio w/4 micro servos,

1250kV out-runner brushless motor, 35A

brushless ESC (min.) & 11.1V 1500mAh

LiPo battery

The SU-31's cutting-edge maneuvers and astounding aerobatics have made it an air show superstar for almost two decades. An eye-

catching MonoKote trim scheme and compact size are sure to do the same for this E-Performance Series ARF. Take it out for a fun day of

sport ﬂ ying or perform pulse-quickening 3D maneuvers! It's compact and easy to take along to the ﬂ ying ﬁ eld or the local park. The model

combines traditional, built-up construction with the beneﬁ ts of brushless power. Wing halves slide onto a carbon-ﬁ ber wing tube for fast

assembly and accurate alignment. GPMA1547

Wingspan: 50 in (1270 mm)

Wing Area: 494 in² (31.9 dm²)

Weight: 3.25-3.5 lb (1475-1590 g)

Wing Loading: 15-16 oz/ft² (46-49 g/dm²)

Length: 47.75 in (1215 mm)

Requires: 4-channel radio w/4 micro servos, receiver,

45A ESC,

out-runner brushless motor,

11.1V 2100mAh LiPo battery

Acclaimed aviator Matt Chapman is famous for thrilling crowds with his jaw-dropping

aerobatics at air shows worldwide. Now you can impress your friends at your local ﬂ ying ﬁ eld

with this ofﬁ cially licensed, 50" span reproduction of his Eagle 580! Its ultra-light airframe

and airfoiled control surfaces offer precision tracking and incredible agility. State-of-the-

art materials – including carbon ﬁ ber, hand-selected woods and ﬁ berglass – accelerate

assembly time to just 6-8 hours. A factory-applied MonoKote® trim scheme adds eye-

catching looks, while die-cut decals let you recreate Matt Chapman's Embry-Riddle-inspired

design – or create a custom look of your own. GPMA1573

Make a copy of this identiﬁ cation tag

and put it on or inside your model.

™