DaySequerra M4 Series 사용자 설명서 - 페이지 9
{카테고리_이름} DaySequerra M4 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DaySequerra M4 Series 16 페이지. Hd radio tuner
페이지 인쇄- 1. Table of Contents
- 2. Important Safety Information
- 3. Service Information
- 4. Introduction
- 5. M4 Series Key Features
- 6. M4 Series Technical Specifications
- 7. Unpacking and Installing
- 8. Front Panel Controls and Indicators
- 9. M4 Series Operating Description
- 10. Sample VFD Displays
- 11. Performance Loss Monitor
- 12. M4.2R Ethernet Port Setup
- 13. Three Year Warranty
Forcing Control. The FORCING control is used to select A-D SPLIT mode, functional with AM or FM
TM
HD Radio
signals. When locked to an HD Radio
tuner in A-D SPLIT mode. In A-D SPLIT mode, the analog audio outputs and headphone jack provide
left analog program audio in the M4 left channel and the left HD Radio
channel. This mode provides for audio phase matching as well as audio level and time-alignment of
TM
the HD Radio
broadcast for the correct analog diversity delay. FORCING arrow LED illuminates
when tuner is in FORCING mode. Subsequent momentary push of FORCING switch turns FORCING
mode and FORCING LED off. Default mode is off.
When tuned to an HD Radio
tuner is forced into HD-1 DIGITAL-only mode; the M4 is then locked only to the HD-1 broadcast. There
is no DIGITAL-only mode for multicast broadcasts.
Data – Display. The DATA - DISPLAY control provides display of RBDS PS and RT fields (M4.2R
only) as well as PAD data for HD Radio
mode is active. DATA - DISPLAY switch selects RBDS from the current analog broadcast or PAD data
from the current HD Radio
tuner's VFD. Momentary push scrolls through each PAD field in the following sequence:
•
Station long name
•
Station program type
•
Song title
•
Artist
•
Album
•
Genre
•
Comment
Subsequent momentary push of DATA - DISPLAY switch turns DATA - DISPLAY mode and DATA -
DISPLAY LED off. The second line of VFD display scrolls if the message is longer than 16 characters.
If there is no data for the selected field, VFD displays "NO" plus the data category; e.g., "NO ALBUM
DATA."
In the M4.2R, RBDS PS and RT fields are displayed per RBDS specifications. Station long name,
station short name and program type are processed as an ID3 tag. In all M4 models, HD Radio
data; i.e., song title, artist, album, genre and comment fields are limited to 127 bytes each for a total of
1018 bytes per message per iBiquity
please visit www.ibiquity.com and www.id3.org.
UP. Momentary push of UP control tunes frequency up one increment in TUNER BAND mode, when
held for three seconds tunes faster. UP selects next stored preset station in PRESETS mode (no faster
mode, one push per preset). Selects next item in other menus and is used for other functions as
described herein.
DN. Momentary push of DN control tunes frequency down one increment in TUNER BAND mode,
when held for three seconds tunes faster. DN selects next stored preset in PRESETS mode (no faster
mode, one push per preset). Selects next item in other menus and is used for other functions as
described herein.
Select Control. When tuner has acquired any station and SELECT switch is held for three seconds,
tuner goes into PRESETS store mode; PRESETS arrow LED flashes. UP and DN controls then allow
user to scroll through A1 through A20 or F1 through F20, dependant on band.
TM
broadcast and the FORCING switch is depressed for 5 seconds, the
TM
signals. DATA - DISPLAY arrow LED illuminates when
TM
MPS (HD-1) or HD-2 through HD-8 multicast signal to be displayed on
TM
specifications. For more information on ID3 tags and PAD data,
TM
signal, momentary push of FORCING switch puts
TM
audio program in the M4 right
M4 User Manual
TM
PAD
9