GREAT PLANES YAK 55 사용 설명서 - 페이지 3

{카테고리_이름} GREAT PLANES YAK 55에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GREAT PLANES YAK 55 16 페이지. 3d ep with flightflex

페이지 인쇄

PROTECT YOUR MODEL, YOURSELF

& OTHERS...FOLLOW THESE

IMPORTANT SAFETY PRECAUTIONS

1. Your YAK 55 should not be considered a toy, but rather a

sophisticated, working model that functions very much like a full-

size airplane. Because of its performance capabilities, the YAK

55, if not assembled and operated correctly, could possibly

cause injury to yourself or spectators and damage to property.

2. You must assemble the model according to the instructions.

Do not alter or modify the model, as doing so may result in an

unsafe or unflyable model. In a few cases the instructions may

differ slightly from the photos. In those instances the written

instructions should be considered as correct.

3. You must take time to build straight, true and strong.

4. You must use an R/C radio system that is in first-class

condition with a correctly sized motor and components

throughout the building process.

5. You must correctly install all R/C and other components so

that the model operates correctly on the ground and in the air.

6. You must check the operation of the model before every

flight to insure that all equipment is operating and that the

model has remained structurally sound. Be sure to check

clevises or other connectors often and replace them if they

show any signs of wear or fatigue.

7. If you are not an experienced pilot or have not flown this

type of model before, we recommend that you get the

assistance of an experienced pilot in your R/C club for your

first flights. If you're not a member of a club, your local hobby

shop has information about clubs in your area whose

membership includes experienced pilots.

We, as the kit manufacturer, provide you with a top quality,

thoroughly tested kit and instructions, but ultimately the

quality and flyability of your finished model depends on

how you build it; therefore, we cannot in any way

guarantee the performance of your completed model, and

no representations are expressed or implied as to the

performance or safety of your completed model.

Remember: Take your time and follow the instructions to

end up with a well-built model that is straight and true.

LITHIUM BATTERY SAFETY

WARNING!! Read the entire instruction sheet included

with the battery. Failure to follow all instructions could

cause permanent damage to the battery and its

surroundings, and cause bodily harm!

• ONLY use a LiPo approved charger. NEVER use a

NiCd/NiMH peak charger!

• NEVER charge in excess of 4.20V per cell.

• ONLY charge through the "charge" lead. NEVER

charge through the "discharge" lead.

• NEVER charge at currents greater than 1C.

• ALWAYS set charger's output volts to match battery volts.

• ALWAYS charge in a fireproof location.

• NEVER trickle charge.

• NEVER allow the battery temperature to exceed

150°F (65° C).

• NEVER disassemble or modify pack wiring in any way

or puncture cells.

• NEVER discharge below 2.5V per cell.

• NEVER place on combustible materials or leave

unattended during charge or discharge.

• ALWAYS KEEP OUT OF REACH OF CHILDREN.

ADDITIONAL ITEMS REQUIRED

Radio Equipment and Electronics

NOTE: Recommended part numbers are included

in parentheses.

❏

4-channel radio minimum (for maximum 3D performance,

a computer radio with mixing is recommended)

❏

4 sub-micro servos ( 0.3 oz [9g] or less each) (FUTM0042)

❏

Micro receiver (FUTL0442-3)

❏

Servo Y-harness (FUTM4130)

❏

two 6" Servo extensions (HCAM2000)

❏

two 12" Servo extensions (HCAM2100)

❏

25-amp brushed ESC (GPMM2025)

❏

1250 - 1500mAh 3-series Lithium Polymer battery

pack (GPMP0823) (GPMP0831)

❏

Lithium Polymer Charger...

Great Planes Triton Charger (GPMP3150) or

Great Planes Polycharger (GPMM3010)