Automate Pulse 2 Hub 빠른 시작 매뉴얼 - 페이지 3
{카테고리_이름} Automate Pulse 2 Hub에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Automate Pulse 2 Hub 4 페이지.
페이지 인쇄
IOS - HomeKit
Pairing Process
?
STEP 2
What is the Hub type?
Are you connecting to your new hub or are you
connectingto someone else's hub (shared)?
Note: Shared Hubs have limited access.
New Hub
Shared Hub
Back
Next
?
STEP 4
Ensure your hub
device is on
Please ensure you are connected to a 2.4GHZ WiFi network.
You will need to scan the barcode on the bottom of the Hub.
Bridge Name
Use the name provided or
enter a custom name.
RA-Pulse-1012352
Continue
Identify
Add Hub to HomeKit
Time to add some devices
Add a Hub then you can start adding shades.
Add a Hub
?
STEP 3
Ensure your hub
device is on
Please ensure you are connected to a 2.4GHZ WiFi network.
You will need to scan the barcode on the bottom of the Hub.
Add Hub to HomeKit
?
STEP 4
Ensure your hub device is on
Please ensure you are connected to a 2.4GHZ WiFi
network. You will need to scan the barcode on the
bottom of the Hub.
Bridge Added
to My Home
Done
View in Home
Add Hub to HomeKit
?
STEP 1
Add new location
Lets create a location. Example: My Home address.
Location name
My Home
Back
Next
?
STEP 4
Ensure your hub device is on
Add Accessory
Scan code or hold iPhone
near the accessory.
Use the HomeKit Setup Code
Look for the code on the accessory or its
packaging and position it in the frame.
OR
Hold iPhone Near the Accessory
You can hold iPhone near this label if it
appears on your accessory.
I don't have a Code or Cannot Scan
Add Hub to HomeKit