DaySequerra MultiMerge2 사용자 설명서 - 페이지 4

{카테고리_이름} DaySequerra MultiMerge2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DaySequerra MultiMerge2 19 페이지. 5.1 surround audio processor

Important Safety Information

Indoor use only. Not for use in wet or damp environments.
Maximum Relative Humidity: <80%
Class I Equipment (grounded type)
Electrical rating: 100-120/220-240V~50-60Hz 25W max
AC Mains supply voltage fluctuations are not to exceed +10% of the nominal voltage
Operations temperature range -40C to 70C
Maximum altitude: 3000m (9843ft)
Equipment suitable for continuous operation
Weight: 3.2kg (7lbs) equipment only
Important Note: Please connect your MultiMerge2 to an uninterruptible power supply (UPS) to
provide other protection against power surges and low-voltage conditions.

Service Information

The DaySequerra MultiMerge2 contains no user serviceable components inside the unit.
contact DaySequerra for repair and upgrade information. In the event that your unit needs to be
returned to the factory, contact us for a return authorization number.
www.daysequerra.com and register your new MultiMerge2 so we can keep you informed of the
latest hardware and software updates.
The lightning flash with arrowhead symbol is intended to alert the user to the presence of un-
insulated "dangerous voltages" within the product's enclosure that may be of a sufficient level
to cause harm.
4
MultiMerge2 User Manual
The exclamation point within a triangle is intended
to alert the user to the presence of important
operating and maintenance instructions within the
product literature.
Exposed portions of the power supply assembly are
electrically live. To reduce risk of electric shock, the
power cord must be disconnected when the power
supply assembly is removed. For continued
protection against electric shock, a correctly wired
and grounded (earthed) three-pin power outlet must
be used. Do not use a ground-lifting adapter and
never cut the ground pin on the three-prong plug.
The ground terminal of the power plug is connected
directly to the chassis of the unit.
Please
Please visit