Automate AM2 소유자 매뉴얼 - 페이지 12

{카테고리_이름} Automate AM2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Automate AM2 19 페이지.
Automate AM2에 대해서도 마찬가지입니다: 설치 매뉴얼 (18 페이지)

To enter or exit Valet

1. Turn the ignition on.

2. Turn the ignition off.

3. Press and release the Valet®

The status LED will light steadily if you are entering Valet

Mode and will turn off if you are exiting Valet

➜

One Time Bypass

The one-time bypass feature is used only when the passive/auto

rearm (feature 1) is turned on. It prevents the system from

arming itself automatically one time by cycling the ignition key

to the on position for 2 seconds then back off. The LED will

stop flashing rapidly to confirm.

➜

If you are threatened in or near your vehicle, you can attract

attention by triggering the system with your transmitter. Just

press

for two seconds to enter Panic Mode. In Panic Mode,

the horn will honk and the parking lights will flash for 30

seconds. To stop Panic Mode at any time, press

transmitter again.

note: In order for Panic Mode to be effective, the vehicle's

horn (or optional siren) must be connected.

Mode:

switch within 10 seconds.

DRW-35

Mode.

on the