DayStar KG09104BK 지침서 - 페이지 5

{카테고리_이름} DayStar KG09104BK에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. DayStar KG09104BK 8 페이지. Coil spring spacer, 2007-2011 chevy tahoe/gm trucks

7. Remove upper strut tower nuts.

8. Remove the lower strut bolts.

9. Remove the upper ball joint nut. Separate the ball joint from the

knuckle by hitting the side

10. The strut will drop down.

11. Pull the strut down so you can remove the strut from the vehicle.

12. You will have to cut the stock strut bolts down so stud extenders

will thread all the waydown to the bottom of the studs. The length

of stud after it is cut should be no longer than 3/4". Thread the nuts

to the bottom of the studs, mark the studs, and cut them using

ahacksaw or cut-off wheel.

13. After you cut the studs, apply thread lock to the studs and install the

stud extenders. Slidethe Polyurethane spacer over the stud exten-

sions and seat it on top of the strut. The spacer should be even with

or slightly above the shoulders on the stud extensions.

This kit should be installed by a professional mechanic