DayStar KG09105 지침서 - 페이지 6

{카테고리_이름} DayStar KG09105에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. DayStar KG09105 8 페이지. Coil spring spacer, 2007-2011 chevy tahoe/gm trucks

14. Install the lower bolts first. Start the bolts but do not tighten them at this

time. The control arm and strut are under load, so you will need to push

down on the control arm while pushing inward on the strut to line up the

studs with the upper mounting holes. Install the factory upper nuts on the

studs. Tighten the lower bolts to 37 ft-lbs.

15. Tighten the upper nuts to 20 ft-lbs. Do not use an impact gun. Torque all

bolts in this install to factory specifications.

16. Reinstall the upper ball joint, sway bar, and ABS lines.

17. Install Daystar warning label to driver's sun visor.

18. Have a professional wheel alignment performed after installing the kit.

19. RETORQUE ALL BOLTS AFTER 500 MILES.