DayStar KJ04520BK 설치 지침 매뉴얼 - 페이지 7

{카테고리_이름} DayStar KJ04520BK에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DayStar KJ04520BK 8 페이지. 2007 and up jeep wrangler jk body lift 2 door and 4 door

페이지 인쇄

10. Repeat steps 7 to 9 with the remainder of the mounts on this side.

11. After you have installed on one side remove the 4x6 jacking block and lower

down the Jeep tub onto the body mounts and install the 2 nuts and 1 bolt per

mount and had tighten down and move the floor jack over to the other side

and repeat steps 5 threw 10. If all the mounts have been installed, remove the

4x6 jacking block and lower jeep tub onto the body mounts

12. With all the body mount spacers installed remove the floor jack. use a 16mm

socket and tighten all the 2 nuts per mount down to 40 ft lbs. Using a 18mm

socket tighten down the 1 bolt per mount down to 80ft lbs.

13. Connect the electrical connectors(4) and position the grill(2) onto the front

end of the grill support and seat the clips(3) fully. Install the push pin fasten-

ers(1).