Emerald Planet EP-HW-240-Li10v2 설치 지침 - 페이지 3

{카테고리_이름} Emerald Planet EP-HW-240-Li10v2에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Emerald Planet EP-HW-240-Li10v2 4 페이지.

Battery Specification:

Voltage: DC 3V (Lithium battery)

GP Energy: CR123A. （Lithium battery）

Installation:

1. Take out the base, knock out the appropriate hole for wiring as required.

Refer to the black areas of Diagram 2.

List of material:



Base



Screw 3.9*25mm



Plastic plugs



Bubble bags



Installation manual

2. Choose the suitable position where you

want to install the product.

3. Hold the base on the installation position,

mark installation hole of the base with

pencil.

4. Bore two installation holes on the mark

with a 5mm drill bit. Insert the two plastic

plugs into holes with a hammer.

5. Attach the base to the plastic plugs and

fix tightly the screws (3.9*25mm) into the

plastic plugs.

6. Strip the Live, Neutral and Interconnect

wires back to the recommended strip

length (refer to diagram on the right)

7. Connect the external live wire, neutral wire

and interconnection wire to the terminal of

the base, and ensure the terminal screws

are fully tightened.

8. Fit the alarm on the base.

Diagram 2

x 1

x 2

x 1

Near the

triangle

mark

Diagram 3