Great Power Engine GP-61 사용 설명서 - 페이지 12
{카테고리_이름} Great Power Engine GP-61에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Power Engine GP-61 14 페이지.
Great Power Engine GP-61에 대해서도 마찬가지입니다: 소유자 매뉴얼 (10 페이지)
페이지 인쇄
Cylinder Base Bolts
Cylinder Base Bolts
Carburetor Mount Bolts
Propeller Bolts
The engine must be regularly check for fuel seepage at this could indicate a lean fuel/air ratio, which
might cause erratic running or damage to engine.
We recommend spark plug replacement every 20 hours of running, reed valve check after 50 hours,
and a complete checkup of engine by authorized service centers after 300 hours.
LIMITED WARRANTY
5
The needles get damaged when they are tightened with too much force. Adjustments to carburetor cannot be made once the needles are
damaged and therefore must be replaced.
Regular carbon steel screws are not strong enough for high horsepower engines. Therefore, M6×55 special alloy screws come with our
6
GP178. They are special alloy (SNCM439) which has a better tensile strength to prevent propeller screws from breaking during flights.
M6×55 can only applied on GP178 only.
GP123
M5×30
GP178
M5×25
GP38
M5×16
GP61
M5×16
GP76
M5×16
GP123
M5×16
GP88
M5×18
GP178
M5×20
GP38
M5×65
GP61
M5×50
GP76
M5×75
GP88
M5×45
GP123
M5×45
GP178
M5×108
GP38
M4×40
GP61
M5×45
GP76
M5×45
GP88
M5×45
GP123
M5×50
GP178
M6×55
11
90 in-lbs
90 in-lbs
90~100 in-lbs
70 in-lbs
65 in-lbs for Wood Prop
70 in-lbs for Wood Prop
75 in-lbs for Wood Prop
90 in-lbs for Carbon Prop
90 in-lbs for Wood Prop
6
110 in-lbs for Carbon Prop
5