HiB 32700 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} HiB 32700에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HiB 32700 4 페이지. Inline fan
HiB 32700에 대해서도 마찬가지입니다: 매뉴얼 (9 페이지), 매뉴얼 (8 페이지)

Mounting Fascia

1. The ventilation should be ducted through the roof space, ducting to an external soffit under the eaves or

grille in the slope of your roof.

Ducting can only run between joists, not across them.

2. Mark the position of the fascia with a pencil in a suitable posistion on the ceiling, making sure that it is

between joists.

3. Drill a 9mm hole through the ceiling along the edge of the pencil line. Now cut out the hole with a pad

saw.

4. Hold the fascia against the ceiling and mark the posistion of the fixing holes, fix the unit in place using suit-

able fixings - (not supplied)

5. Attach the flexible ducting with the metal hose clamps.

Ensure the ducting has a smooth flow towards the

motor body. Follow a simular procedure for the outside wall grille.

Extra ducting may be used to extend the

distance to the external grille but the performance will be reduced.

Mounting Fan Unit

Install the Cyclone Inline fan within the loft or ceiling space, ensuring the correct direction of air flow using

the arrows on the fan.

DO NOT COVER

the motor or LED driver with loft insulation. The fan is only suitable for

horizontal mounting

on a wall or floor. See fig A and fig B.Follow the visual aids below to mount the Fan unit.

min 1m

Do not mount duct or

g. A horizontal on a wall

g. B horizontal on a oor

motor vertically

Do not run the ducting over the joists, this will cause a build of condensation and reduce the

extraction rate. Ensure the ducting is run between joists to create smooth airflow.