ADEMCO VISTA 5140XM 사용자 설명서 - 페이지 6

{카테고리_이름} ADEMCO VISTA 5140XM에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ADEMCO VISTA 5140XM 15 페이지. Commercial fire & burglary alarm system

페이지 인쇄

BURGLARY ALARM SYSTEM OPERATION

CONSOLE BURGLARY FUNCTIONS

1. ALPHA DISPLAY WINDOW: A 2-line,

32-character Liquid Crystal Display

(LCD).

Displays protection point

identification

and

system

status

messages, and user instructions.

2. OFF KEY: Disarms the burglary portion

of the system, silences alarms and

audible trouble indicators, and clears

visual displays after the problem has

been corrected.

3. AWAY KEY:

Completely arms both

perimeter

and

interior

burglary

protection for backup protection by

sensing an intruder's movements

through protected interior areas as well

as guarding doors, windows, etc. Late

arrivals can enter through an entry delay

zone without causing an alarm if the

system is disarmed before the entry

delay time expires.

4. STAY KEY:

Arms the perimeter

burglary protection, guarding doors,

windows and other perimeter protection

points, and sounds an alarm if one is

opened. Interior protection is not armed.

Late arrivals can enter through an entry

delay zone without causing an alarm if

the system is disarmed before the entry

delay time expires.

5. TEST KEY: Tests the burglary system

and burglary alarm sounder if disarmed.

6. BYPASS KEY: Removes individual

protection zones from being monitored

by the system. Displays previously

bypassed protection zones.

7. CHIME KEY: Turns on/off the CHIME

mode so that any entry through a delay

or perimeter zone while the system is

disarmed causes a tone to sound at the

Console(s).

IMPORTANT!: When using the keypad to enter codes and commands,

sequential key depressions must be made within 3 seconds of one another.

If 3 seconds elapses without a key depression, the entry is aborted and

must be repeated from its beginning.

– 10 –

# KEY:

Permits ARMING of the

system without use of a security code

("Quick Arm", if programmed to do so

at installation time).

KEYS 0-9:

Used to enter your

individual security code(s).

10. CODE KEY:

Allows the entry of

additional security codes that can be

given to other users of the system.

11. READY KEY: When depressed prior

to arming the system, the console will

display all faulted zones. This key will

also display all zone descriptors that

have been programmed for your

system, by holding the key down for

at least 5 seconds.

12. INSTANT KEY:

Arms in manner

similar to STAY mode, but turns off

the entry delay period, offering

greater security while inside and not

expecting any late arrivals. An alarm

will occur immediately upon opening

any perimeter protection point,

including entry delay zones.

13. MAXIMUM KEY:

Arms in manner

similar to AWAY mode, but eliminates

the entry delay period, thus providing

maximum protection. An alarm will

occur immediately upon opening any

protection point, including entry delay

zones.

14. POWER INDICATOR: (GREEN) Lit

when primary power is on. If off,

system is operating on its backup

battery

power.

CALL

YOUR

INSTALLER IMMEDIATELY.

15. ARMED INDICATOR:

(RED) Lit

when the system has been armed

(STAY,

AWAY,

INSTANT

MAXIMUM).

16. INTERNAL SOUNDER:

Source of

audible

internal

warning

confirmation sounds, as well as

alarms (see "Summary of Audible

Notifications").

and

– 11 –