HiB 33800 매뉴얼 - 페이지 3

{카테고리_이름} HiB 33800에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HiB 33800 9 페이지. Inline fan
HiB 33800에 대해서도 마찬가지입니다: 매뉴얼 (8 페이지), 빠른 시작 매뉴얼 (4 페이지)

Mounting - Fascia

1. Ceiling mounted ventilation should be ducted through the roof space, by ducting to an external

soffit under the eaves or grille in the slope of your roof. NB: Ducting installed between a floor and

ceiling can only run between joists, not across them.

2. Mark the position of the vent fascia with a pencil in a suitable position on the ceiling, making sure

that it is between the joists.

3. Drill a 9mm hole through the ceiling anywhere along the edge of the pencil line. Now cut out the

hole with a pad saw.

4. Hold the vent fascia against the ceiling and mark the position of the fixing holes. Fix the unit in

place using suitable heavy duty plasterboard fixings (not supplied).

5. Attach ﬂexible ducting with the metal hose clamps. Ensure that the ducting has a smooth

ﬂow towards the motor body to minimise air resistance. Follow a similar procedure for the

outside wall grille. Extra ducting may be used to extend the distance to the external grille but

performance will be reduced.

1. Install the Cyclone Inline fan within the loft or ceiling space (ensuring correct direction of air ﬂow

using arrows on the fan). DO NOT COVER motor or LED driver with loft insulation. The fan is

suitable for only horizontal mounting on a wall (fig. A) or a ﬂoor (fig. B). When mounting the fan

ensure there is a minimum of 1m straight ducting to the motor body (see fig.B).

g. A horizontal on a wall

2. Using a screw driver, remove

screws on clips.

min 1m

g. B horizontal on a oor

3. Remove bracing clips & remove central unit.

Do not mount vertically

hib.co.uk