Great Stuff RoboReel Water Hose Reel 사용자 설명서 - 페이지 9
{카테고리_이름} Great Stuff RoboReel Water Hose Reel에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Stuff RoboReel Water Hose Reel 20 페이지. Roboreel water hose reel
페이지 인쇄3.3 How to Attach Tow Rope and Engage Brakes
CAUTION: Do not move the Hose Reel by pulling the hose itself or by pulling the Hose Cone (1 in Figure 6) on the unit.
1.
Before moving the unit, attach the Tow Rope to the notches located on the inside of either the front or rear set of legs
(See Figure 6). The length of the rope may be shortened by tying one or more knots in the rope.
2.
To prevent the Hose Reel from rolling, tap your foot against the green button on each wheel to engage brakes. If the brakes do
not engage when tapped, slightly roll the unit in either direction, then tap the button again. To disengage brakes tap foot
3.4 Connecting the Hoses and Components
All attachments connecting to a hose or to each other use our water-tight Quick Connect system, eliminating the need to screw
components together.
To connect attachments shown in Figure 8 below:
1.
Pull back the collar on the component.
2.
Firmly insert the connecting piece into the component.
3.
Release the collar which will snap back into place, locking the component to the connecting piece. If the collar does not snap
into place easily, gently push the connecting piece until the collar fits correctly or gently push the collar into place.
NOTE: To remove a connecting piece, pull back the collar to release the connecting piece.
against green button on each wheel in opposite direction. (See Figure 7).
Figure 6
Figure 7
6