Automated Processes, Inc. 529 운영자 매뉴얼 - 페이지 11

{카테고리_이름} Automated Processes, Inc. 529에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Automated Processes, Inc. 529 14 페이지. Stereo compressor

THRUST

MEDium

MEDium: A slight attenuation of the low frequencies and a slight boost in the high frequencies, with a

flat mid-range are applied to the signal feeding the RMS detector. This reduces the low fre-

quencies from pumping the compressor as much and increases the sensitivity of the RMS

detector to the higher frequencies, affecting the higher frequency peaks of the signal.

THRUST

LOUD

LOUD: A gradual, linear filter, down 15dBat 20Hz and up 15dB at 20kHz is applied to the signal feed-

ing the RMS detector, equalizing the energy going into the RMS detector. This decreases the

way the higher frequencies are compressed. The overall difference is a noticeable increase of

punch and low frequencies, but a uniformly compressed signal. It is the "little more punch"

function.

The THRUST® circuit can be engaged using the THRUST

5 2 9 S t e r e o C o m p r e s s o r

switch.

THRUST

: Cycle to select the THRUST



LOUD: Inserts the LOUD THRUST

RMS detector (red LED)



MEDium: Inserts the MEDium THRUST

RMS detector (yellow LED) and LOUD (red LED)



NORMal: No filter before the RMS detector (green LED)

function

filter before the

A P I