DAYTEK A02841302 제품 설명서 - 페이지 2

{카테고리_이름} DAYTEK A02841302에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAYTEK A02841302 4 페이지. Micro indoor retractable clothesline 3.5m

BEFORE YOU BEGIN

Please check the carton contains all the

required parts before installing the clothesline.

Your carton should contain the following:

A. Wall plugs x 4

B. Screws x4

C. Hook with Bracket x 1

D. Retractable Line Case with Bracket x 1

(Fixings included are for installing into masonry or

timber/stud walls only. For fixing to other materials

consult your local hardware specialist)

INSTALLATION INSTRUCTIONS

Tools required for installation:

•

Drill

•

Masonry drill bit (8mm diameter)

•

Phillips head screwdriver

1. Mark and drill two holes in the wall at the

desired installation height. If installing to a

masonry wall and using the supplied wall plugs,

drill 8mm holes and tap the plugs into place (A).

2. Fix the detachable bracket from the

retractable line case (D) at the desired

height, by using the two screws (B).

Note: This product is intended

for Indoor Use Only

Installation location

The maximum extension of the clothesline is 3.5m.

The chosen installation location must have a

wall-to-wall spacing no larger than 3.5m.

For timber wall/ stud installation, follow

instructions and use 2mm diameter pilot hole to

drill all mounting positions. Plastic plugs are not

required for this type of installation.

Check for hidden pipes and cables before drilling.