DAYTEK M52 제품 설명서 - 페이지 11

{카테고리_이름} DAYTEK M52에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAYTEK M52 12 페이지. Mk2 rotary clotheslines

To attach a new line

1. Start by clamping one end of the new line into

ARM 1 as shown below (ARM 1 can be any arm

you choose).

2. Work your way around the clothesline

attaching the line at ARM 2, 3 & 4 as shown

below. Ensure line is pulled tight and clamped

in Tensioner Block before moving on to

next arm.

ARM 1

STRING ONE END

ARM 2, 3 & 4

STRING LINE

HOW TO TENSION THE LINE ON YOUR DAYTEK ROTARY CLOTHESLINE

1. At the required tensioning point, place your index

finger on top of the Tensioner Block Top and over

the Nut to ensure that the Nut is held in position.

2. Loosen the bolt from under the arm of the

clothesline.

STRING BOTH ENDS

TERMINAL BLOCK TOP AFFIXED

3. When you arrive back at ARM 1, remove the

Tensioner Block Top and clamp both line ends

into line tensioner as shown below, making

sure the lines are pulled tight.

4. Trim line ends leaving approximately 5cm.

TERMINAL BLOCK TOP AFFIXED

3. Pull the line through the Tensioner Block to

required tension and re-tighten the bolt.

4. Repeat this process around the clothesline

working the slack cord towards the end of

the line.